Close

Page 23 of 23 FirstFirst ... 13212223
Results 221 to 226 of 226
  1. #221
    Super-Moderator epigramx's Avatar
    Join Date
    13.09.2017
    Posts
    366
    Any available port would do (e.g. add 1 to 26760 and use 26761) but it would also need to set that port on Cemuhook's ini (or PadTest). Alternatively the other program taking over that port could be removed.
    Author of WiimoteHook; co-author of Static FPS mods, author of guides to game assembly patching , compiling mesa and high-res screenshots

  2. #222
    New user
    Join Date
    24.07.2018
    Posts
    5
    I changed the port to 26761 in WiimoteHook ran Padtest with the new port and it works wonderfully! It's still not showing up under devices in the gamepad motion source menu in Cemu though. How do I change the port in the CemuHook.ini? Do you just add "Port = 26760"? I'm not seeing a readme for CemuHook.

    I'm reluctant to remove the device I have now using port 26760 because it was quite the process to get it connected (PS3 Controller) and I use it primarily when gaming.
    Last edited by Dsharp; 26.07.2018 at 02:56.

  3. #223
    Super-Moderator epigramx's Avatar
    Join Date
    13.09.2017
    Posts
    366
    In cemuhook.ini, and under an [Input] section, it takes serverPort = 26761; from here https://cemuhook.sshnuke.net/padudpserver.html

    e.g.

    Code:
    [Input]
    serverIP = 127.0.0.1
    serverPort = 26761
    PS. serverIP line can probably be omitted in this case.
    Last edited by epigramx; 17.08.2018 at 12:02.
    Author of WiimoteHook; co-author of Static FPS mods, author of guides to game assembly patching , compiling mesa and high-res screenshots

  4. #224
    New user
    Join Date
    24.07.2018
    Posts
    5
    That did it! Thanks for all your help epigramx. Nothing like being able to use your Wiimote's in Cemu. When running WiimoteHook, pairing the device and then opening up Dolphin emulator, it recognizes the Wiimote there too. Excellent software.

  5. #225
    New user
    Join Date
    16.08.2018
    Posts
    1
    Hello!

    WiimoteHook crashes immediately on startup. I have Windows 7 (not virtual) and the Toshiba Bluetooth Stack installed and working. The WiiMote functions in Dolphin fine. I have the .NET Framework, the emulated gamepad Drivers and the XBox 360 Controller Drivers installed.

    Informations about my System (if its important):
    Core i7 4930k
    2 GTX 670
    8GB DDR3 1600Mhz
    and a HAMA (german company) CSR4.0 Bluetooth USB Dongle
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	crash.PNG 
Views:	16 
Size:	107,9 KB 
ID:	464  

  6. #226
    New user
    Join Date
    18.08.2018
    Posts
    1

    Thumbs up

    Thank you. WiimoetHook works very well.
    I hope the WiimoteHook Setting Editor will include the Wii Classic Controller.
    Now, only wiimote and Nunchuk can do Wii U key mapping.

    Do you plan to add wii classic controller in setting editor?
    Last edited by ddol2; 18.08.2018 at 19:44.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •